https://www.geeknetic.es/Noticia/36088/Silverstone-presenta-su-nueva-RL-para-servidores-con-un-unico-socket-y-diseno-de-doble-bomba.html

A few months ago Silverstone He presented us with his solution liquid cooling for servers and workstationswhich have a configuration of double socket. Now it brings us the same product, but adapted to those users who only want to configure their equipment with a single processor, we talk about the RL Silverstone XE360PDwith a double pump system that you can adapt to a multitude of processors available for servers and workstations.

New Silverstone XE360PD for boards with a single socket

Depending on the processor type, the XAC-MK-4189 is available for the Intel socket LGA4189the XAC-MK-4710 for Intel sockets LGA4677 and LGA4710and the XAC-MK-SP5 is sold to install on AMD SP5 and sTR5. Your radiator is 38mm and has a size of 360mm to include 3 120mm fans. The block is constructed of nickel-plated copperwhich maximizes efficiency to extract heat while offering durability.

Adapts to a multitude of processors, which requires an extra adaptation kit

The radiator has two integrated pumps that maximize their efficiency and quickly distribute the coolant throughout the entire circuit. One is responsible for extracting the liquid from the head, while another push towards him after it has cooled, running through the entire radiator. The pumps can work up to 4,000 RPMfor which they need a 3-pin, 12-volt power input. The header joins the radiator with 2 rubber tubes of 45 cmsufficient length to place it in different locations.

Double pump up to 4,000 RPM

Along with the system, they include 3 high-performance fanswith dual bearings, PWM control and a liquid crystal polymer impeller. These can operate from 800 RPM up to a maximum of 3,000 RPMcapable of offering a flow of 95.1 CFMa pressure of 5.2mmH2Omaintaining a noise level of 39.6 dBA.

Includes 3 fans with a maximum noise of 39.6 dBA

For now It is not known what price it may have this new RL for servers and workstations. These are its complete specifications.

General information

• Compatibility: Motherboards with a single CPU socket
  • Note: Requires additional purchase of the mounting kit corresponding to your CPU socket.

water block

• Dimensions: 68mm(W) x 26mm(H) x 83mm(D)
• Material: copper base
• Bomb:
  • Engine speed: 4,000 RPM
  • Rated voltage: 12V
  • Rated current: 0.4 A
  • Connector: 3 pin

Radiator

• Dimensions: 120mm(W) x 38mm(H) x 400mm(D)
• Material: Aluminum

Tubes

• Length: 450mm
• Material: Rubber

Fans

• Dimensions: 120mm(W) x 27mm(H) x 120mm(D)
• Speed: 800 – 3,000 RPM
• Noise level: 39.6 dBA
• Rated voltage: 12V
• Maximum air flow: 95.1 CFM
• Maximum air pressure: 5.2 mmH₂O
• Connector: 4 PWM pins
• Bearing: Double ball bearing (Dual ball bearing)

Recommendations

• Make sure the fan connector powering the pump provides a stable 12V voltage to ensure cooling performance.
• It is recommended to disable PWM/DC mode for this connector in the motherboard BIOS, or set it to maximum speed.