ASUS presents the TUF GAMING K4 MAGNETIC, a gaming keyboard with 8,000 Hz and adjustable actuation distance

ASUS presents the TUF GAMING K4 MAGNETIC, a gaming keyboard with 8,000 Hz and adjustable actuation distance





To accompany the new eSport mice, ASUS has also presented during this Gamescom 2026 new keyboards from its TUF series for gamers. The new keyboards TUF GAMING K4 MAGNETIC They are available in black and white, they have a TKL design with 70% to take up less space on your table, and some magnetic switches in which you can even customize the actuation distance to adapt to your type of pulsation.

ASUS TUF GAMING K4 MAGNETIC with 8,000 Hz and adjustable actuation

The new wired keyboards ASUS TUF GAMING K4 MAGNETIC they have a polling rate also 8,000 Hzwith a dedicated button to switch between two available modes. The magnetic switches are customizable through ASUS software, with a Actuation distance from 0.1 to 3.3 mmand that you can change with increments of only 0.01mm.

Geeknetic ASUS presents the TUF GAMING K4 MAGNETIC, a gaming keyboard with 8,000 Hz and adjustable actuation distance 2

Its design is designed to reduce noise, with 5 layers of cushioning and a PCB orientation designed for a quieter and more pleasant writing experience. The keys are Double injection PBT for longer duration, and also includes a volume control to raise and lower the volume or control multimedia more comfortably. Its design with removable cable makes it more comfortable to transport, and you can remove it to carry it in your backpack.

Geeknetic ASUS presents the TUF GAMING K4 MAGNETIC, a gaming keyboard with 8,000 Hz and adjustable actuation distance 3

TKL keyboard with compact design and available in black and white

It is available in black and white coloralthough at the moment we do not have a recommended price for this new keyboard.

Geeknetic ASUS presents the TUF GAMING K4 MAGNETIC, a gaming keyboard with 8,000 Hz and adjustable actuation distance 4

Article Editor: Juan Antonio Soto

Juan Antonio Soto

I am a Computer Engineer and my specialty is automation and robotics. My passion for hardware began at the age of 14 when I broke down my first computer: a 386 DX 40 with 4MB of RAM and 210MB of hard drive. I continue to give free rein to my passion in the technical articles I write for Geeknetic. I dedicate most of my free time to video games, contemporary and retro, on the more than 20 consoles I have, in addition to the PC.